OpenPetro AI · Learning Tools

TOC from Logs: Passey ΔlogR

Overlay a scaled porosity log on resistivity, measure the separation in organic-rich, fine-grained rock, and convert it to total organic carbon with the level of organic metamorphism. Compare with density and gamma-ray methods, and calibrate to core.

ΔlogR = log10(R/Rbase) + 0.02·(Δt − Δtbase)
TOC = ΔlogR · 10(2.297 − 0.1688·LOM) + TOCbkg

Resistivity

Rt Ω·m
baseline Ω·m

Sonic

Δt µs/ft
baseline µs/ft

Density

ρb g/cm³
baseline g/cm³

Neutron

φN v/v
baseline v/v

Maturity (LOM)

10.0Ro ≈ %
GR APIU ppm
TOCbkg wt%

Log view and ΔlogR overlay

Resistivity (log scale) and sonic are scaled so that 50 µs/ft equals one resistivity decade and the baselines line up. Shaded separation is ΔlogR. TOC is shown only where GR is above the fine-grained cutoff. Load your own LAS 2.0 or CSV; it stays in your browser.

Click sets GR ≥

Sample data (synthetic): 05_toc_dlogr_organic_shale.las (organic shale) 05_toc_core_paste.txt (paste into Core calibration)

Passey chart: TOC vs ΔlogR by maturity

Each line is one LOM. The same separation means much less organic carbon in a mature rock than in an immature one. Hover to read TOC at any LOM.

Methods and formulas

Values at the current point. Constants for Schmoker and the GR line are editable; their defaults are basin-specific starting points.

Schmoker a / bGR TOC = m·GR + c

Core calibration

Paste core TOC as depth, TOC (wt%), one per line. The tool matches each sample to the log, fits the LOM that best reproduces core TOC with the sonic ΔlogR, and refits the GR line.

Method and assumptions