OpenPetro AI · Learning Tools

Permeability from Logs

Sandstone with dispersed clay: convert total porosity and saturation to the effective system, then compare Timur, Tixier and Coates, check irreducible water on a Buckles plot, and calibrate to core.

φe = φt − Vsh·φsh
Swe = (Swt·φt − Vsh·φsh) / φe
φtTotal porosity
v/v
density or N–D total
VshShale volume (dispersed)
v/v
from GR or N–D
φshShale porosity
v/v
clay-bound water, pure shale
SwtWater saturation (total)
v/v
at irreducible conditions
Effective system
φe–
Swe–
BVWe–

Buckles plot

Swe vs φe with lines of constant bulk volume water. Samples at irreducible saturation fall along one hyperbola; samples in the transition zone fall above it. Log samples are shown as small dots.

Permeability vs effective porosity

Each model at the current Swe. Hover to compare.

Log view

A synthetic sand with a transition zone at the base. Load your own LAS 2.0 or CSV with total porosity, Vsh and Sw curves; it stays in your browser. Click a depth to send it to the calculator.

Sample data (synthetic): 03_permeability_phit_vsh_sw.las (PHIT, VSH, SWT) 03_permeability_core_paste.txt (paste into Core calibration)

Models and formulas

k in mD; φ and Sw as fractions. The effective column is the recommended one; the total column shows the bias from using total-system values in shaly sand.

Core calibration

Paste core samples as φt, Vsh, Sw, k_core (mD), one per line. Each is converted with the current φsh. The tool fits a multiplier for each model and a general form k = a·φeb/Swec.

Method and assumptions